Hinweis: Mittlerweile hat sich beim Sultan-Kernel massiv etwas getan. Habe den Sultan-Kernel r10 ( vom letzten Monat ) vom Server geschmissen und durch die aktuellste r20.8 vom 16 Februar ersetzt.Michael hat geschrieben:Hallo Meyertier,Meyertier hat geschrieben:Hallo Michael
Erst mal vielen vielen Dank f??r deine Anleitung. Ich habe mir erstmal die Dateien runter geladen. Ich habe auch schon einmal deine Anleitung grob ??berflogen. Werde sie noch 2 bis 3 mal genau lessen und dabei eine Flasche Baldrian trinken zur Beruhigung und f??r die Nerven aus Drahtseile.
Schertz bei Seite ich werde mich mal dran versuchen sobald ich die Zeit und Ruhe daf??r habe
Vielen Dank noch mal f??r deine Arbeit und deine M??hen.
Gru?? Meyertier
habe mittlerweile zwecks Optimierung des PA/AOKP JellyBam 4.1.2 ROMs den kompatiblen Sultan-Kernel vom 21.01.2013 eingespielt. Diesen einfach ganz normal mittels EXT4-Recovery flashen. Der Vorteil dieses Kernels ist, dass man vollen Zugriff auch auf die beiden CPU-Kerne hat ( beim flashen laeuft der Aroma-Installer der einen massen an Parametern abfragt welche man nutzen moechte oder auch nicht. Hierzu zaehlen auch Taktraten der GPUs ( 2D/3D Grafikchips etc.p.p. ). Da laesst sich das Sensation herrlich Stromsparend konfigurieren und letztendlich unter JellyBam auch unter Settings/Performance Control steuern.
Habe meine beiden Kerne Min auf 192Mhz und Max auf 1566Mhz gestellt ( also exakt so wie im total identischen HTC Sensation XE ( ist ja von der Hardware 1:1 ). Und endlich versetzt es das HTC Sensation in den DeepSleep Mode und endlich klappt das mit der Akku-Standzeit bei diesem Kernel auch wunderbar...
Hier der Link: ftp://HD2:HD2@perlitschke.homeftp.net/h ... -Aroma.zip
Hier die Aenderungen der letzten 4 Wochen:
r20.8 on 2/16/2013:
added zipalign and boost binaries back
removed CPU bus bandwidth increase in order to solve bootloops
r20.5 on 2/16/2013:
fixed bootloops by removing the zipalign and boost binary files in /system/bin from the Aroma installer
fixed a typo with the readahead cache buffer in the init.d script
r20 on 2/15/2013:
merged new changes from AIO mod into the Aroma installer
added new features/fixed bugs in the Aroma
added 2nd phase frequency to Intellidemand
added 2nd phase frequency to Ondemand
increased CPU bus bandwidth
added suggestions to Aroma
updated to Linux 3.0.64
switched to SLUB
switched to GP timer
switched to -O3 optimization
optimized build flags
changed readahead buffer size to 128KB (for better real world performance)
recompiled kernel with a custom Linaro 4.7.3 toolchain optimized for Cortex-A8
enabled WiFi PM_FAST by default
switched to PM_FAST for the bcm4329 driver
added frandom support (for use with CrossBreeder)
allow flash LEDs to be used at 1% battery (so you can use camera flash or torch at 1% battery)
r20 betas
r20b5 on 2/13/2013:
kernel should DEFINITELY be booting for everyone now
r20b4 on 2/13/2013:
updated to Linux 3.0.63
switched to SLUB
switched to GP timer
switched to -O3 optimization
modified build flags so now the kernel should be booting for everyone
r20b3 on 2/12/2013:
modified build flags so the kernel should now be booting for everyone
r20b2 on 2/11/2013:
changed readahead buffer size to 128KB (for better real world performance)
optimized build flags (tell me how you like the performance )
recompiled kernel with a custom Linaro 4.7.3 toolchain optimized for the Cortex-A8 processor architecture
r20b1 on 2/10/2013:
enabled PM_FAST by default
switched to PM_FAST for the bcm4329 driver
added frandom support (for use with CrossBreeder)
allow flash LEDs to be used at 1% battery (so you can use camera flash or torch at 1% battery)
r19.5 on 2/9/2013:
fixed battery drain issue
r19 on 2/5/2013:
fixed mpdecision/core1 going offline bug permanently
lowest CPU voltage you can go to is now 800mV instead of 700mV (in order to fix the mpdecision bug)
updated to 3.0.62
fixed USB OTG support
merged a ton of fixes/features from Frankinstine
merged WiFi PM_FAST from Frankinstine
thermald has been fixed
changed CPU frequency on boot from 1188MHz to 1512MHz for faster boot time
r18 on 2/3/2013:
rebuilt kernel with clean 3.0.61 source from Albinoman887's GitHub
fixed kernel based mpdecision as a result
r17 on 1/31/2013:
added Scorpion optimizations
switched to -O2 optimization for a nice speed boost
recompiled kernel with the new Jan 2013 release of Linaro
switched back to Bruce's kernel source as the base
switched back to non-kernel based mpdecision
updated the Bruce based source to 3.0.61
fixed USB OTG (for the Bruce based source)
r16.8 on 1/26/2013:
added voltage control (Evervolv's source didn't have it)
r16.5 on 1/26/2013:
switched back to kernel based mpdecision (the current mpdecision doesn't work with the new kernel)
added CPU-based alignment handling for greater performance (Frankinstine)
r16 on 1/26/2013:
kernel updated to 3.0.60 as a result of the rebase to Evervolv
(hopefully) fixed USB OTG
added USB OTG support back
switched kernel base to Evervolv (I've gotten everything to work, including Sweep2Wake)
replaced the Intellidemand in this kernel with the version that is currently in Faux's kernel
removed Sixaxis support for now (I don't think it was working)
r15 on 1/21/2013:
allow the 2D GPU to underclock to 145MHz (that's the lowest it'll underclock to)
merged upstream changes from Bruce's Git (there are many changes)
tethering is most likely working again (please tell me)
r14 on 1/20/2013:
added Sixaxis support
added options for GPU underclocking to Aroma
added Interactive and SmartassV2 governors
added UHID support so this kernel works perfectly with Android 4.2.1 (note that my kernel will not fix ROM related bugs in 4.2.1)
fixed voltage so you can overvolt to 1450mV
added GPU underclocking
added Badass GPU algorithm
Badass: allow bypassing of frequencies
r14 betas
r14b4 on 1/17/2013:
added UHID support so this kernel works perfectly with Android 4.2.1 (note that my kernel will not fix ROM related bugs in 4.2.1)(thank you, LaidbackNikez/Evervolv)
fixed voltage so you can overvolt to 1450mV
added GPU underclocking
there are new versions: no bcm4329 and bcm4329 included. ONLY use bcm4329 included if WiFi doesn't work
r14b3 on 1/16/2013:
removed kernel based mpdecision so it doesn't conflict with the new mpdecision
added non-kernel based mpdecision (same as SebastianFM, thank you SebastianFM )
updated the Aroma installer to work with the new mpdecision
this beta includes an Aroma installer
r14b2 on 1/14/2013:
updated to Linux 3.0.58 (thank you, DragunKorr)
removed GPU underclock capability for now (I'm out of time for today; I still need to test it. It'll be added into tomorrow's beta)
switched GCC optimization flag back to -Os (the kernel bootlooped with anything else)
smartassV2 is still included
r14-beta1 on 1/13/2013:
added smartassV2
allowed the 3D & 2D GPU to be underclocked
changed optimization from -Os to -Ofast, making a kernel that is 10% bigger but optimized for speed (need feedback)
r13 on 1/13/2013:
fixed minfree settings not being applied
added script to automatically execute init.d
sucessfully automated the removal of the harmful files
r12.5 on 1/12/2013:
fix nasty bug that is causing problems for everyone. fixes problems like mpdecision not working, settings from Aroma not being applied (CPU governor particularly), and possibly even reboots (thank you for finding this, Dohclude)
r12 on 1/12/2013:
fixed badass configuration in Aroma
added Google's Snappy compression & decompression
changed the zRam compression mode from LZO to Google's Snappy, making zRam ~2x faster
switched kernel compression mode from Gzip to LZO, resulting in about a 10% kernel size increase but a LARGE INCREASE IN PERFORMANCE (my kernel is still pretty small)
r11 on 1/10/2013:
added Aroma installer
added notification LED duration mod
added bcm4329 WiFi driver so WiFi will work on all Sensations (driver was taken from PYD-X since the source I'm using didn't have it)
r10 on 1/5/2013:
updated to 3.0.57
Achja, und hier der DL-Link: ftp://HD2:HD2@perlitschke.homeftp.net/h ... CM4329.zip
Installationn wie gehabt:
1.) Runterladen
2.) Zip-File auf die SD-Karte des Sensation kopieren
3.) Ins Recoversy booten
4.) Zip ganz normal flashen
Daten & Einstellungen gehen keine verloren...
Gruss,
Micha